Genuine Aspire SkyStar Revvo Kit with 2ml Revvo Tank (Touch Screen)
Aspire SkyStar Revvo Kit
Aspire brings you yet another great new mod and tank kit. Introducing the even more powerful, more up to date, Skystar Revvo kit. It's a dual 18650, 210 watt mod with a 1.3 inch touch screen and the revolutionary Revvo tank. Aspire has broken the mold for a tank of this type and brings you an all new concept in coils, the flat Radial coil. A coil for great vapor production and excellent flavor. The tank itself comes in a TPD compliant 2ml version and a standard 3.6ml version. It has adjustable top airflow and is top fill, it is simplicity itself to fill, change coils and even replace the glass.
- The tank comes in a TPD compliant 2ml version and a standard 3.6ml version.
Easy maintenance Revvo tank
- The Revvo tank is almost too easy to maintain, to disassemble and reassemble is merely unscrewing or screwing the various parts, the coil can be changed even when there is liquid in the tank.
No one has yet produced such an innovative replaceable coil for a tank until now, except of course, Aspire. The fantastic all new coil design, the ARC, 'Aspire Radial Coil' which sits horizontally in the tank similar to a 'stove-top' design. Of course the real trick in the design is the increased surface area of the coil for great flavor and great vapor production, made using Kanthal material and rated at 0.10-0.16ohm.
The tank has adjustable top airflow with three large air inlets to enable full enjoyment of your favorite e-liquids.
Revvo Tank Filling
- Filling your new Revvo through the centre of the tank, in which sits a spring loaded filling tube. The spring of the tube is soft enough to allow even slight pressure from almost any type of bottle/glass dropper to open it, but strong enough to create a leak proof seal when released after filling.
Skystar Battery Installation
- Battery installation is almost foolproof, inside there are clearly marked battery orientation markings (+ and -) and of course a securely mounted battery removal tape. When inserting the batteries, turn off the mod. Open the back panel by inserting a fingernail into the slot at the bottom and pull off the battery cover.
Skystar Touch Screen
While the mod is on, swipe down the screen twice will take the mod into its menu interface, where you can adjust the settings to your liking :modes,data,system,Time,About
Skystar Mod Charging
The Skystar can also be charged via the Micro-USB port. When charging the screen will display 2 flashing battery icons, voltage level, charge current as well as charge time. The charging port can also be used to update the firmware.
1* SkyStar mod / 1* Revvo tank / 2* Coils (0.10-0.16ohms) / 1* Glass tube / 10* O-rings
1* USB cable / 2* Warning cards / 1* User manual / 1* Warranty card / 1* Protective silicone cap