Simple Steps To Fill And Enjoy Vaping The First Time

Vaping can be fun. It helps relieve stress. To get started, you need to ensure that everything is done perfectly. A simple vaporizer may have several different components. You need to connect all components in the right order. 

• You have to be aware of the full capacity of the vape device
• It is important to understand if the device is top or bottom fill type
• You can test the device for performance with a few drops 

If you are testing the device, then you can pour a few drops directly on the coil. You can also collect information relating to the Voopoo Drag X device online. 

Disassemble the vape tank

You may have to fill the vape tank with the right type of e-liquid. The vape tank has to be disassembled. You may also have to unlock the airflow base. The location of the airflows lock may not be the same in all vape devices.

You may also have to disassemble the coil of the vaporizer. In case you are using a new flavour, then cleaning the tank is also essential. You have to clean the tank before you fill in the vape liquid.

Fill the cotton hole

It is not possible to stuff the entire vape tank instantly. The liquid has to be filled in drop by drop. It is more effective to use a quality dropper to fill in the liquid in the cotton hole. This will also ensure that the liquid does not drop outside the vape device tank.

If the device has two or three cotton holes then each hole has to be filled with a drop of e-liquid. Some devices may have as many as 6 holes. This is one of the best techniques to ensure that the coil does not get overheated producing dry vapor.

Do not exceed the maximum mark

Any vape tank will always be marked with the minimum and maximum capacity. The moment you are filling the tank with vape liquid, it is important to focus on the marks. Exceeding the maximum mark will simply overflow the liquid. 

If the liquid is below the minimum mark then the device may only get overheated. When filling the liquid it is important to avoid filling the centre tube. This will only block the passage of the vapor and airflow. You may not be able to enjoy its rich flavor.

Reassemble the vape device

You can search for pod salt UK options online and go through the right filling techniques on the websites. Once the liquid is filled it is important to replace the tank in its place. Always ensure that all components have been assembled in the right place.

Do not leave any component loose. Check the position of the coil before you turn the device on. It is important to screw the base back in its position. It is also important to wait for a few minutes before you switch the device on and use it. Always ensure that the liquid has settled down in the vape tank so the coil can get heated evenly.