How to Use the Hayati Pro Max Plus 6000?

• Khan Afridi

The Hayati Pro Max Plus 6000 is designed for users who want a smooth, flavour-rich, and long-lasting vaping experience without the complexity of traditional vape kits. With its auto-refilling 10ml tank, TPD-compliant 2ml pod, mesh coil system, and 850mAh rechargeable battery, this device is engineered for convenience, flavour consistency, and extended use.

This guide gives you clear, accurate instructions on how to set up the device, activate the coil properly, monitor your e-liquid levels, and avoid common mistakes like dry hits or improper pod seating. Whether you’re a first-time vaper or switching from disposables, this walkthrough ensures a smooth start.

What is the Hayati Pro Max Plus 6000?

The Hayati Pro Max Plus 6000 is a next-generation rechargeable vape kit designed for users who want a long-lasting, flavour-rich experience without the hassle of refilling or replacing coils. It features a 2ml sealed pod paired with an integrated 10ml auto-refill tank, meaning the device feeds e-liquid automatically—no messy refills or bottle handling required.

Powered by an 850mAh pure cobalt lithium-ion battery and engineered with advanced mesh coil technology, the Pro Max Plus ensures smooth vapour, consistent flavour, and a premium MTL draw from start to finish. Its transparent tank design and LED battery display make it easy to monitor both battery and e-liquid levels, while its pod-replacement system keeps it fully TPD-compliant and UK-2025 regulation safe.

This makes it ideal for:

  • Beginners who want a straightforward, button-free device

  • Disposable users switching to a more cost-effective, longer-lasting option

  • Flavour chasers who prefer mesh coils and stable power output

  • Vapers who want simplicity with premium performance

Step-by-Step Guide: How to Use the Hayati Pro Max Plus 6000

Step 1: Unboxing & Preparation

When you open your Hayati Pro Max Plus 6000 kit, you’ll find:

  • The main battery device

  • A sealed 2ml prefilled pod

  • An auto-refilling 10ml internal tank (already installed)

Before using the device:

  • Remove all protective stickers and airflow seals

  • Take off the rubber cap from the mouthpiece

  • Check the transparent tank to confirm e-liquid is visible

  • Inspect the magnetic connectors for dust or debris

  • Tap the LED display to ensure the battery indicator is working correctly

Why it matters:
Any remaining travel seal or blocked airflow hole can prevent the auto-draw sensor from firing or cause weak vapour.

Step 2: Charging the Device

The Hayati Pro Max Plus 6K is equipped with an 850mAh rechargeable battery optimized for low-voltage vaping output.

How to charge it correctly:

  1. Insert a USB-C cable into the charging port

  2. Use a standard 5V adapter (avoid fast chargers to protect battery health)

  3. Watch the LED battery display until it reaches 100%

  4. Disconnect immediately once fully charged

Charging time: 35–45 minutes
Battery type: Pure cobalt lithium-ion

Important:
Overcharging reduces battery lifespan and increases heat stress. Always unplug once the device reaches full charge.

Step 3: Inserting the Pod

Each Hayati Pro Max Plus pod contains:

  • A 2ml sealed e-liquid chamber

  • A mesh coil wick system

  • Magnetic connectors

  • A dedicated MTL airflow inlet

To insert the pod:

  • Align the pod with the slot at the top of the device

  • Push gently until the magnetic lock clicks into place

  • Ensure the pod sits firmly and flush—no wobbling

A misaligned or loose pod causes:

  • Weak flavour

  • Intermittent firing

  • Airflow restriction

  • Auto-draw misfires

Step 4: Switching Flavours

Unlike some dual-flavour devices, the Hayati Pro Max Plus 6000 uses a single-flavour pod system synced with a 10ml internal refill tank.

If your retailer offers multiple flavours:

  • You can switch to a new flavour only when you replace the pod

  • There is no twist-switch flavour selector on this model

This ensures TPD compliance and consistent flavour without mixing or contamination.

Step 5: Start Vaping

The Hayati Pro Max Plus uses a button-free, draw-activated firing system.

How to vape:

  • Place the mouthpiece gently between your lips

  • Take a slow, steady MTL inhale

  • The auto-draw sensor activates the mesh coil

  • Enjoy smooth vapour and a clean throat hit

For best performance:

  • Avoid rapid chain vaping

  • Allow a second between pulls so the auto-refill wick stays saturated

  • Use steady, controlled puffs for maximum flavour output

Overdrawing or inhaling too forcefully can cause dry hits.

Step 6: When & How to Replace Pods

Since the pod automatically refills from the 10ml internal tank, you do not refill it manually.

Replace the pod when:

  • Flavour becomes dull or burnt

  • Vapour production drops noticeably

  • The internal 10ml supply is fully depleted

  • The pod chamber appears empty

  • You reach the end of the 6000-puff expectancy

How to replace the pod:

  1. Pull the pod straight up

  2. Unbox a new Hayati Pro Max Plus certified pod

  3. Insert it until the magnets lock

  4. Allow 5 minutes for auto-refill saturation before vaping again

A new pod restores full flavour and smooth vapour instantly.

Maintenance & Safety Tips for the Hayati Pro Max Plus 6000

Keeping your Hayati Pro Max Plus 6000 in good condition ensures better flavour, smoother airflow, and longer device life. The following simple practices help maintain performance and prevent avoidable issues.

1. Keep the Device Clean & Dry

Dust, liquid, or residue around the airflow inlet or magnetic connectors can interrupt draw activation.

  • Wipe the mouthpiece regularly

  • Clean the pod connectors once a week

  • Keep the device away from moisture, pockets with lint, or spills

2. Use Only Compatible Hayati Pods

Non-genuine pods may damage the mesh coil or disrupt the auto-refill mechanism.

Counterfeit pods can cause:

  • Coil burnout

  • Leaking or spit-back

  • Battery strain

  • Chemical or harsh flavour

  • Failure of the 10ml internal refill system

Always use authentic Hayati Pro Max Plus 6000 pods for consistent and safe performance.

3. Charge the Device Safely

The 850mAh battery performs best when charged correctly.

  • Charge with a standard 5V USB-C adapter

  • Avoid fast chargers and car adapters

  • Do not leave the device charging overnight

4. Store in the Right Conditions

Temperature affects e-liquid viscosity and coil performance.

  • Heat thins e-liquid → causes burnt hits

  • Cold thickens e-liquid → restricts wicking and airflow

Store at room temperature to protect both the pod and internal refill tank.

Troubleshooting Your Hayati Pro Max Plus 6000

If your device stops working correctly, most problems can be fixed in minutes.

1. Device Not Charging

Try these steps:

  • Switch to another USB-C cable

  • Use a verified 5V power adapter

  • Clean the charging port with a dry cotton bud

  • Avoid fast chargers

If the LED display does not turn on, the cable or adapter is usually the issue.

2. No Vapour When Inhaling

Common causes include:

  • Pod not fully clicked into place

  • Wick not saturated

  • Low or empty internal e-liquid tank

  • Airflow blocked by debris

Fix:
Reseat the pod, wait 2–3 minutes, check the tank level, or replace the pod if needed.

3. Burnt or Harsh Taste

This happens when:

  • The coil is dry

  • You’ve been chain-vaping

  • The internal 10ml tank is empty

  • The pod is reaching end-of-life

Solution:
Replace the pod and give it time to saturate before inhaling again.

 

Newer post
Older post
Back to blog