How To Use HQD Glow Air 70K? Step-By-Step Guide for New Users

The HQD Glow Air 70K is a high-capacity prefilled pod kit for vapers who want maximum convenience and serious longevity in one device. With up to 70,000 puffs, an 850mAh rechargeable battery, dual mesh coil technology, USB Type-C charging, and a multi-flavour pod system, it offers the power of a pod mod with the simplicity of a disposable-style vape.

If you’ve just bought one (or are thinking about it) and you’re wondering how to use the HQD Glow Air 70K properly—how to set it up, charge it, insert pods, switch flavours, and avoid burnt hits or charging issues—this guide is written exactly for you.

What Is the HQD Glow Air 70K?

The HQD Glow Air 70K is a rechargeable pod-based vape system from HQD, a brand known for large-puff disposables and pod kits aimed at convenience-focused users.

Key Features at a Glance

While exact specs can vary slightly by region and retailer, most HQD Glow Air 70K devices offer:

• Up to 70,000 puffs per kit (based on typical puff length)

• 850mAh built-in battery with USB Type-C fast charging

• Dual mesh coil design for stronger flavour and smoother vapour

• Multi-pod / dual-flavour or 4-in-1 system, allowing you to swap between flavours without changing devices

• OLED / LED display showing battery status, sometimes juice level and other indicators

• A slide switch or selector to swap between flavours or pods

• Typically 20mg (2%) nicotine salt e-liquid in a wide range of flavours (fruity, dessert, ice, candy, etc.)

• Inhale-activated (draw-activated) – no fire button to press

Where It Sits Compared to Other Devices

Compared to a disposable vape:

• It can last significantly longer thanks to the high puff count

• You recharge the battery instead of throwing the whole device away

• You can switch flavours within the same device, depending on pod configuration

Compared to a refillable pod kit:

• No need to refill tanks or handle bottles of e-liquid

• No coil changes or messy disassembly

• Easier and cleaner for beginners and ex-smokers who want a simple, prefilled pod vape

So, the HQD Glow Air 70K is ideal for users who want a long-lasting, dual-flavour or multi-flavour pod vape without the complexity of fully refillable systems.

Step-By-Step Guide: How to Use the HQD Glow Air 70K

Step 1: Unboxing & Preparation

When you open your HQD Glow Air 70K kit, you’ll typically find:

• 1 × HQD Glow Air 70K device (battery section)

• 2–4 prefilled pods or pod modules (depending on version / 2-in-1 or 4-in-1 system)

• Refill containers / internal reservoirs (on some TPD-compliant versions)

• 1 × user manual or instruction leaflet

Some kits include a USB Type-C charging cable, but others assume you’ll use your own.

Before You Start

Do this before your first vape:

• Remove all external packaging and inner trays

• Take the pods out of their blister packs

• Carefully remove:

  • Any rubber bungs or silicone plugs from the mouthpiece

  • Stickers, films, or plastic tabs covering metal contacts

  • Any obvious transit seals on refill reservoirs

• Inspect both pods and device for:

  • Cracks

  • Heavy leaks

  • Any visible damage

To avoid problems later, only use genuine HQD Glow Air 70K pods that are designed for this device.

Step 2: Charging the Device

Even if the battery has some power out of the box, it’s best to fully charge your HQD Glow Air 70K before first use. This helps you understand real-world runtime and avoids weak performance.

How to Charge the HQD Glow Air 70K

1. Plug a USB Type-C cable into the charging port on the device.

2. Connect the other end to a reliable wall adapter (avoid very old plugs or weak USB ports).

3. Check the screen or LED indicator—you should see a charging icon, bar animation, or battery symbol moving.

4. Leave it on charge until the battery icon shows full.

An 850mAh battery is usually designed to give a full day or more of regular use for most vapers, depending on how often and how hard you puff.

Charging Safety Tips

• Charge on a flat, hard surface, not on beds, sofas, or inside bags

• Avoid charging overnight or leaving the device plugged in unattended for long periods

• Don’t use damaged or ultra-cheap chargers

• If the device becomes very hot while charging, unplug it immediately and let it cool down

Safe charging protects both you and the battery, and it helps maintain device performance in the long term.

Step 3: Inserting the Pod

Once your HQD Glow Air 70K is fully charged, you’re ready to insert a pod.

How to Insert the Pod Correctly

1. Hold the device upright in one hand.

2. Take your chosen pod and make sure any protective seals or plugs are removed from the base and mouthpiece.

3. Align the pod with the pod slot at the top of the device so the shapes and contacts match.

4. Push or slide the pod in until it clicks or snaps securely into place.

5. The pod should sit flush with the device and feel stable—no wobbling or large gaps.

In some 4-in-1 or multi-flavour versions, multiple pods may sit in a rotating internal tray or multi-pod platform controlled by a selector. In that case, make sure each pod is seated properly in its slot before use.

Step 4: Switching Flavours

One of the biggest advantages of the HQD Glow Air 70K over standard disposables is the ability to switch between flavours without changing devices.

Depending on your specific configuration, your device may support:

• Dual-flavour switching (2-in-1, left/right)

• 4-in-1 flavour switching with multiple pods/modules

How to Switch Flavours

1. Locate the flavour switch or selector slider on the device (often on the side or bottom).

2. Slide or switch it fully towards the icon or label representing the flavour you want (e.g. Flavour 1 / Flavour 2).

3. Watch the OLED/LED screen if your device has one—the active pod or flavour is usually highlighted by an icon, light, or text.

4. After switching, take 3–6 gentle puffs so the cotton wick can be fully saturated with the new e-liquid and push out any lingering taste from the previous flavour.

Is Mixed Flavour Normal When Switching?

Yes. Because flavours share the same coil and airflow path, the wick holds a bit of the previous liquid. You may notice a few “mixed” puffs right after switching, especially with very strong flavours. This usually clears quickly if you stay on the new flavour.

Step 5: Start Vaping

The HQD Glow Air 70K is an inhale-activated (draw-activated) device, so there’s no fire button.

How to Vape the Right Way

1. Place the mouthpiece between your lips.

2. Take a slow, controlled mouth-to-lung (MTL) puff:

   • Draw vapour into your mouth

   • Then inhale into your lungs if you like

3. Don’t pull too hard or too sharply:

   • Very strong pulls can flood the coil, cause gurgling, and weaken vapour

   • The airflow sensor works best with steady, moderate suction

4. Leave a few seconds between puffs. This gives the dual mesh coil and cotton time to re-saturate and prevents dry hits.

If your HQD Glow Air 70K has a screen, you’ll probably see:

• Battery percentage or bars

• Puff count

• Sometimes an approximate e-liquid indicator

This information helps you manage battery life and decide when to change pods.

Step 6: When & How to Replace Pods

Even though the Glow Air 70K is designed for extreme longevity overall, individual pods still have a limited life.

Signs It’s Time to Replace a Pod

• Flavour has become weak, dull or strange, even after charging

• You get occasional burnt or harsh hits

• The e-liquid level in your pod or reservoir is very low or empty

• The pod is leaking or gurgling and cleaning doesn’t help

• The coil/wick looks very dark or burnt through any visible window

How to Replace the Pod

1. Gently pull or slide the used pod out of the device.

2. Dispose of it responsibly according to local waste regulations.

3. Unpack a new HQD Glow Air 70K pod (or compatible module, depending on the version).

4. Remove all protective films, bungs, or seals.

5. Insert the new pod into the device until it clicks firmly into place.

6. If the pod is fed by an internal reservoir, give it a minute or so for the coil to fully saturate before chain vaping.

Swapping to a fresh pod restores flavour clarity, vapour density and overall smoothness.

Maintenance & Safety Tips for the HQD Glow Air 70K

1. Keep the Device Clean and Dry

A bit of simple care goes a long way:

• Wipe the pod base and golden contacts occasionally to remove residue

• Clean the pod chamber with a dry tissue or cotton bud

• Wipe the mouthpiece to remove dust, lint and condensation

• Never wash the device or pods under water

Clean contact points help prevent misfires, connection errors and poor performance.

2. Only Use Compatible Pods

To ensure safety and performance:

• Use official HQD Glow Air 70K pods (or the compatible line specified for your model)

• Avoid forcing third-party pods into the device—they may not fit properly, can leak, or damage the contacts

Matching the correct pod system with the correct HQD device ensures proper power delivery, airflow and nicotine strength.

3. Charge Safely (Avoid Overcharging)

Good charging habits keep the 850mAh battery healthy:

• Use a quality USB-C cable and a trustworthy wall adapter

• Unplug the device when it’s fully charged

• Don’t charge in very hot environments or in direct sunlight

• Never leave the device charging under pillows, blankets or in bags

4. Store in the Right Conditions

How you store your device affects flavour and coil lifespan:

• Keep the HQD Glow Air 70K at room temperature

• Avoid leaving it in hot cars or in freezing conditions

• Try to store it upright to minimise potential leaking

• Keep away from direct sunlight and strong heat sources

Proper storage supports battery health, e-liquid quality, and coil integrity over time.

Troubleshooting Your HQD Glow Air 70K

Even with correct use, issues can happen. Here are simple, user-friendly fixes for the most common problems.

1. Device Not Charging

Possible causes:

• Faulty or weak USB-C cable

• Bad wall adapter or underpowered USB port

• Dust, lint or debris in the charging port

• Very low or worn-out battery

What to do:

1. Try a different USB-C cable and wall plug.

2. Inspect the charging port and gently clean it with a dry cotton bud.

3. Leave the device plugged in for 20–30 minutes, then check the screen/LED for a charging icon.

4. If there’s still no response, the battery or internal board may be at end-of-life and the device might need replacing.

2. No Vapour When Inhaling

Possible causes:

• Battery is empty or too low

• Pod not fully seated or incorrectly inserted

• Pod is empty or the coil is burnt

• Airflow sensor blocked by dust or liquid

Fix steps:

1. Recharge the device until the battery indicator shows a healthy level.

2. Remove the pod and reinsert it firmly until it clicks.

3. Check the e-liquid level; if it’s very low or tastes burnt, replace the pod.

4. Clean the mouthpiece and airflow holes to clear blockages.

5. Take slow, steady puffs, not strong, sharp pulls that can confuse the sensor or flood the coil.

3. Burnt or Harsh Taste

Possible causes:

• E-liquid in the pod / reservoir is extremely low or finished

• Coil has burnt due to chain vaping or dry hits

• Puffing too aggressively, causing the wick to dry out

Fix steps:

1. Stop vaping immediately when you notice a burnt or harsh taste.

2. Check the pod:

   • If the liquid is low/empty

   • Or the cotton looks dark or burnt
     …the pod is finished and must be replaced.

3. Insert a new HQD Glow Air 70K pod.

4. Take gentle puffs and leave a few seconds between hits to let the wick re-soak.

5. Avoid vaping when the pod looks visually empty, even if it still produces a little vapour.

FAQs 

How long does the battery last on one charge?

The 850mAh battery in the HQD Glow Air 70K is typically designed to last a full day or longer for moderate users on a single charge. Heavy vapers taking very frequent, long puffs may need to recharge more often. The screen or LED will show battery status so you can monitor it easily.

Can I refill HQD Glow Air 70K pods?

The HQD Glow Air 70K is a prefilled pod system, not a traditional refillable tank:

• Some versions use prefilled pods combined with internal refill reservoirs

• Others use a 4-pod 4-in-1 system with prefilled modules

These pods are not designed for manual refilling by the user. Once the pod and any linked reservoir are empty, you replace the entire pod module with a new, prefilled HQD pod.

How many flavours can I switch between?

This depends on your kit configuration:

• Dual-flavour (2-in-1) setups usually let you switch between two flavours via a slide switch.

• 4-in-1 multi-pod systems can hold up to four flavours in one device, selectable via a switch or selector.

In all cases, expect a few mixed puffs when switching, and take several draws for the new flavour to take over fully.

Final Thoughts

The HQD Glow Air 70K is built for vapers who want a long-lasting, dual-flavour or multi-flavour pod vape with minimal effort. When you know how to unbox, charge, insert pods, switch flavours, maintain the device, and troubleshoot basic issues, you get:

• Better flavour and vapour performance

• Longer battery and pod lifespan

• Fewer leaks, burnt hits and misfires

• A smoother overall vaping experience

This step-by-step guide is designed to match exactly what people mean when they search for how to use HQD Glow Air 70K clear, practical instructions that help them set up and use their prefilled pod kit confidently.