How to Use Hayati Pro Ultra Shisha 30K (Complete Guide)

• Khan Afridi

The Hayati Pro Ultra Shisha 30K is one of the UK’s most advanced high-capacity shisha-style vape kits. It is designed for users who want long-lasting performance, strong flavour output, and a smooth MTL (mouth-to-lung) inhale. With its mesh coil heating system, auto-draw activation, and large e-liquid capacity, it delivers consistent shisha-style vapour with minimal effort.

This guide explains how to set up the device, how to activate it correctly, how to switch flavours, and how to maintain peak performance. You will also find clear troubleshooting steps for common issues such as no vapour, weak airflow, burnt taste, charging faults, and blinking LED errors.

What Is the Hayati Pro Ultra Shisha 30K?

The Hayati Pro Ultra Shisha 30K is a modern prefilled shisha vape device engineered for simplicity and long-lasting use. Its main features include:

  • Up to 30,000 puffs (model dependent)
  • Mesh coil technology for dense vapour
  • Smooth MTL airflow
  • High-capacity built-in battery
  • Auto-draw firing system
  • Large prefilled e-liquid reservoir
  • USB-C charging
  • Dual-flavour pod options (variant dependent)

This device is suitable for new vapers, ex-disposable users, and shisha lovers who want a portable, powerful, and flavourful experience.

Step-by-Step Guide: How to Use the Hayati Pro Ultra Shisha 30K

Step 1: Unboxing and Preparation

When you open the device:

  • Remove all seals, protective films, and plugs
  • Check the mouthpiece and airflow inlet
  • Inspect the pod chamber (if pod-based)
  • Confirm the e-liquid chamber is full
  • Ensure the pod or cartridge is securely attached

It is important to remove airflow stickers or silicone seals, as these can block airflow and prevent the auto-draw sensor from activating correctly.

Step 2: Charging the Device

The Hayati Shisha 30K typically comes partially charged, but topping it up ensures stable vapour output.

  • Insert a USB-C cable into the charging port
  • Use a standard 5V power adapter
  • Charge until the indicator or display shows full
  • Unplug immediately to protect battery health

Charging usually takes 35–45 minutes. Overcharging weakens lithium-ion batteries and may result in inconsistent coil performance.

Step 3: Inserting the Pod (For Pod-Based Variants)

If your Hayati Shisha 30K uses a removable pod:

  • Open a fresh Hayati Ultra Shisha pod
  • Inspect the magnetic connectors
  • Align the pod with the device slot
  • Insert until you hear or feel a confirmed click
  • Ensure the pod is sitting flush

A loose or misaligned pod will cause weak vapour, blinking lights, or no draw activation.

Step 4: Switching Flavours (If Using Dual-Flavour Pods)

Some versions of the Hayati Pro Ultra Shisha 30K support dual-flavour pods.

To switch flavours:

  • Twist the mouthpiece clockwise or anti-clockwise
  • Stop when the flavour selector clicks
  • Take several puffs to allow the new flavour to fully saturate the coil

A temporary mixture of flavours is normal because both chambers share the same mesh coil and wick.

Step 5: Start Vaping (Auto-Draw Activation)

The device activates automatically when you inhale.

  • Place the mouthpiece between your lips
  • Take a slow, steady MTL inhale
  • Allow one to two seconds for vapour production
  • Exhale normally

Avoid short, sharp pulls. Leave several seconds between puffs to allow the wick to re-saturate. Consistent spacing prevents dry hits and maintains flavour quality.

Step 6: When and How to Replace Pods

As the pod ages, the coil and wick begin to degrade.

Replace the pod when:

  • Flavour is muted
  • Vapour output declines
  • Pod feels dry or nearly empty
  • Burnt taste appears
  • LED blinks during use
  • Auto-draw does not respond properly

To replace:
Remove the old pod, open a new Hayati Ultra Shisha pod, align, and insert until locked in place. Twist to your preferred flavour if using dual-flavour cartridges.

Maintenance and Safety Tips for the Hayati Pro Ultra Shisha 30K

Keep the Device Clean and Dry

  • Wipe the mouthpiece regularly
  • Clean pod connectors with a dry cotton bud
  • Remove condensation from the airflow tunnel
  • Keep the device away from water or moisture

Moisture inside the sensor cavity can cause misfires or airflow detection issues.

Only Use Compatible Pods

Non-original pods can cause coil burnout, leaking, poor flavour, and battery strain. Always use genuine Hayati Ultra Shisha pods.

Charge Safely

  • Use only 5V USB chargers
  • Do not charge overnight
  • Unplug at 100%
  • Keep the charging port clean and free of e-liquid

Safe charging improves battery lifespan and helps maintain consistent vapour production.

Store the Device Properly

  • Avoid storing the device in hot cars, pockets, or direct sunlight
  • Avoid freezing conditions
  • Keep the device upright

Heat thins the e-liquid and causes leaks; cold temperatures thicken it and restrict airflow.

Troubleshooting the Hayati Pro Ultra Shisha 30K

Device Not Charging

Possible causes:

  • Faulty USB-C cable
  • Weak power adapter
  • Dust or lint in the charging port
  • Over-discharged battery
  • Internal battery failure

Fix:

  • Use a different cable and a 5V wall plug
  • Clean the charging port
  • Leave on charge for 20–30 minutes
  • If still dead, replace the device

No Vapour When Inhaling

Possible causes:

  • Low battery
  • Pod not inserted properly
  • Blocked airflow sensor
  • Burnt or dead coil

Fix:

  • Charge fully
  • Reinsert pod
  • Clean connectors
  • Take gentle, slow inhales
  • Replace pod if necessary

Burnt or Harsh Taste

Usually caused by a dry wick, an empty pod, overheating, or chain vaping.

Fix:

  • Stop using immediately
  • Replace pod
  • Take slower puffs
  • Avoid heat exposure

A burnt coil cannot be fixed or recovered.

FAQs

How long does the battery last on one charge?

Most users get a full day of heavy use or up to two days of moderate use. Battery life depends on puff length and frequency.

Can I refill Hayati Pro Ultra Shisha pods?

No. These pods are sealed and prefilled. Refilling can damage the wick, cause leaking, and lead to burnt hits.

How many flavours can I switch between?

Dual-flavour pod variants allow switching between two flavours using the twist selector. It may take several puffs for the new flavour to fully replace the old one.

Newer post
Older post
Back to blog