Innokin iTaste Hunter 75watt TC Mod Box and iSub V Tank Kit
Innokin® iTaste™ Hunter Kit
The iTaste™ Hunter Kit from Innokin®, a unique and rugged device, perfect for the outdoors. The ultra-fast and accurate AETHON™ chipset ensures wattage and temperature control with military precision. A circular OLED display and total dry-hit protection are some of this kits fantastic features.
Check out the military style, iTaste Hunter iSub V Starter Kit from Innokin - with Optional XTAR VC2+ Battery Charger
With a pistol grip feel, a lanyard clip and a high-grip back strap, this eye catching starter kit is great for outdoor vaping. The iTaste Hunter kit comes with a 75 Watt mod and an iSub V sub-Ohm tank. The Hunter mod handles both variable wattage and temperature control vaping. This makes it the ideal partner for the kit’s 3ml iSub V tank with stainless steel coils.
It’s not just the pistol-grip styling that makes the iTaste Hunter kit so startling. The mod also sports a circular OLED display screenwhich really makes it stand out from the crowd. Functionally, the mod handles variable wattage and temperature control with military precision. A ‘pre-boost ramp-up’ feature can be deployed to pre-heat your coil for an almost instant response when you press the fire button. The Hunter mod’s Aethon chipset also delivers advanced features, like dry-hit protection, a vape timer and puff counter.
To complement the Hunter mod, Innokin box this starter kit with a dual mode, iSub V tank. The iSub V has a number of special design features which make it ideal for sub-Ohm vaping in temperature control (TC) mode. The main advantage of temperature controlled vaping is the consistency of the warmth, flavour and cloud volume of each draw. For the ultimate convenience, the iSub V’s 0.5 Ohm stainless steel coil heads will also work exceptionally well in variable wattage (VW) mode.
The iSub V is an easy-to-use atomizer tank that’s popular with new and experienced vapers. An airflow control ring on the iSub V’s base can be set to fine-tune your vaping experience for any particular e liquid. Like most modern atomizers, it has a simple, fast top-fill facility. Innokin’s quick change, ‘no-spill’ coil head replacement system is particularly clean and convenient. Replacement coil heads are inexpensive and widely available.
The iTaste Hunter iSub V Starter Kit is available in 3 stunning colours: Black, White or Army Green.
Note: Innokin’s Hunter mod requires a separate 18650 battery and charger
1 x Innokin iTaste Hunter 75W TC Mod
1 x iSub V Atomizer Tank
2 x iSub SS316L 0.5 Ohm Coil Heads
1 x Wide Bore 510 Delrin Drip-Tip
1 x Spare O Rings
1 x Innokin Vape Band
1 x User Manual
Please Note: This starter kit requires a separate 18650 battery (min 2500mAh / 35A high drain) and compatible charger.
Innokin iTaste Hunter 75W TC Mod Features:
- Size: 89mm x 50mm x 25mm
- Connector: Sprung 510 screw with base airflow
- Battery type: Single high output 18650 type (not supplied)
- Switches between TC and VW modes
- Output power: 6 to 75 Watts in 5 Watt increments
- Temp. range: 150 to 315ºC in 5º increments
- Max output current: 27.5 Amps
- Max output voltage: 7.5 Volts
- Min coil resistance: 0.1 Ohms
- Ni TC coil resistance: 0.1 to 0.2 Ohms
- Ti TC coil resistance: 0.1 to 0.5 Ohms
- SS316L TC coil resistance: 0.2 to 1.0 Ohms
- Press fire button 3 times for on/off safety switching
- Circular OLED display screen
- Military/outdoor styling
- Handy lanyard attachment bar
- Fire and up/down control buttons
- New/Same coil prompt
- Precise temperature control for a consistent vape
- Dry hit detection & cut-out circuit
- Built-in puff counter
- Displays vape timer
- Displays battery level
- Adjustable pre-boost wattage ramp-up
- Ultra-low power consumption on standby
- Great looking mod with a rugged design
- Superb, glitch-free temperature control
iTaste Hunter 75W Mod Safety Features:
- Cuts off automatically after 15 seconds firing
- Low voltage warning & cut-off
- Dry hit cut-out
- Short circuit lock-out feature
- Overheating circuit board warning & cut-off
- Accidental battery reversal protection
- Battery vent on screw down compartment cap
iSub V Atomizer Tank Features:
- iSub Tank diameter: 22mm
- Tank case: Stainless Steel
- Tank material: Toughened Pyrex glass
- Drip-tip: Wide bore 510 type (Delrin)
- Accepts any 510 drip-tip
- Filling: Clean, top-fill access to e liquid tank
- Airflow: Adjustable ring with 2 slots on tank base
- Connector: Sprung pin (510 standard)
- Comes with 2 x 0.5 Ohm SS316L VW / TC coil heads
- Special, easy coil change system
- Fast, simple strip-down for cleaning
- Formidable flavour & cloud generation
Innokin iTaste Hunter Kit compatibility:
The iTaste Hunter mod will fire replaceable Kanthal and Stainless Steel coil heads rated up to 75 Watts in variable wattage mode. In temperature control mode, the mod will fire NI200, Titanium and Stainless Steel coils at temperatures up to 315ºC. Please follow the manufacturer’s instructions carefully when switching between modes. The iSub V Tank is compatible with all of the replaceable coil heads in the iSub range.
XTAR VC2 Plus Master Charger
The latest in charger innovation, the VC2 Plus Master is a smart charger that has a countdown timer for each bay, showing the time it needs to fully charge the battery. It can recognize, charge and display both Ni-MH and Li-ion batteries at the same time, and you can totally control the charging speed (0.5A/1.0A) as you like. In order to save time, the USB Output with Power-Path Management System enables you to charge both batteries and the external device at the same time while power is connected!
- XTAR VC2 Plus Master charger
- USB charge cable
- Retail packaging
- Premium carry pouch
- User manual
- Warranty card
- Countdown timer for each bay showing the time it needs to be fully charged.
- Battery power icon and percentage display.
- Clear display of the battery power and charging status by ramping up from 0% to 100% when the battery is fully charged.
- Red LED indicator turns green upon a full charge.
USB Output Function:
Power-Path USB output enables you to charge both batteries and the external device at the same time while power is connected. VC2 Plus Master is more than a charger for your batteries. It also a charger for your device.
With Optional charging currents, you can control the charging speed (0.5A/1.0A) as you like. Ensure fast charging while also prolong the battery life.
Automatically detect battery type and choose the most suitable charging method. Using TC-CC-CV charging for Li-ion battery and pulse charging for Ni-MH/Ni-CD battery. You can mix and charge all kinds of batteries together.
XTAR Current Buffering Charging Technology protects the batteries from high current impact during the charging process.
Intelligent LCD Screen:
Displays charging current, battery power percentage, countdown timer to fully charge. VC2 Plus Master can intelligently recognize/ display/ charge Ni-MH and Li-ion batteries at the same time.
If a bad battery can’t be activated, the screen will display “null”, and if polarity-reverse or charger short circuit happens, screen will display “Err”.
The backlight will automatically go into an energy saving mode without any operation (e.g. inserting a battery to be charged or pressing a button) after 2 minutes. Feature can be enabled manually by pressing the button for 1.5 seconds to save energy and avoid light pollution.